Build an example warm-up from a working weight
Use this warm-up sets calculator to turn a planned working weight into an editable loading ramp. It combines example percentages with your bar and plate inventory, so you can see both an ideal target and a total you can actually assemble.
- Enter the working-set weight you intend to use, not automatically your tested or estimated maximum.
- Check unit and bar weight, then edit available plate pairs to match your equipment. Collars are excluded from this warm-up calculation.
- Review the empty-bar row and the 40%, 55%, 70% and 85% example targets. Duplicate loadable totals are removed.
- Edit the repetitions for each row and print if helpful. The numbers are an example worksheet, not a personalized warm-up prescription.
Working weight and one-rep max are different inputs
If your max is 140 kg but the planned work sets use 100 kg, enter 100 kg here. Entering 140 kg would build a different ramp. The calculator cannot infer what session you meant from the number alone.
A 100 kg example with a 20 kg bar
With sufficient kilogram plates and no collars counted, the targets below are exactly loadable using the displayed example inventory. Change the inventory and some actual loads may fall below target.
| Example stage | Target | Each side |
|---|---|---|
| Empty bar | 20 kg | No plates |
| 40% of working weight | 40 kg | 1 × 10 kg |
| 55% | 55 kg | 1 × 15 + 1 × 2.5 kg |
| 70% | 70 kg | 1 × 20 + 1 × 5 kg |
| 85% | 85 kg | 1 × 20 + 1 × 10 + 1 × 2.5 kg |
Understand target, loadable weight and difference
The target comes from the percentage. The loadable weight comes from the same finite-inventory engine as the plate calculator and never exceeds that target. The difference is target minus actual load. It explains why an equipment-limited ramp can look uneven.
With a 20 kg bar and a light working weight, several targets may resolve to the empty bar. Those duplicate actual loads are removed. If the working weight itself is below the bar, the tool asks you to change the bar or target.
What you still need to choose
The example repetition counts can be edited. The tool does not calculate rest intervals, assess readiness or know how much preparatory work you already completed. Session context and individual preferences can require a different number of stages.
The final warm-up target is 85% of working weight in this example; it is not an extra working set or a claim that everyone must stop their ramp at that percentage. Use the table as a starting worksheet and adjust it with appropriate coaching when needed.
Frequently asked questions
Does the warm-up table include my work sets?
No. It shows example preparation stages below the entered working weight. Your working sets are a separate part of the session.
Why are some stages missing?
Stages with the same actual loadable weight are deduplicated. This is common with light targets or limited small plates.
Can I include collar weight?
Not in this warm-up tool. Collars are excluded and labelled as such. Use the plate calculator when you need to account for both collars explicitly.
Are the percentages a proven protocol?
They are application examples, not a validated personal protocol. The tool makes the arithmetic visible without claiming an ideal warm-up for every lifter.